Recent Changes in Linux4SAM Web retrieved at 03:32 (GMT)
tag Kernel Pre built Demo Media type Board Features Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
SAMA7G5 and Omnivision OV7740 This page describes the possibility of connecting a parallel sensor (example given is Omnivision ov7740) to the SAMA7G5 MPU. The board...
Welcome to 1 Welcome to the main starting point for Linux OS on Microchip Microprocessors. Its aim is to centralize information about Linux kernel and open source...
Using ASRC (Asynchronous Sample Rate Converter) Introduction This page explains the usage of ASRC, available in SAMA7G5 SoCs. The Asynchronous Sample Rate Converter...
Thermal management support on SAMA7G5 Introduction SAMA7G5 support thermal management. The in SoC temperature sensor is connected to channel 31 of ADC. Starting with...
Using ISI (Image Sensor Interface) in Linux4SAM 6.0 and later Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different...
Attaching the TM5000 WVGA Display Follow the link to the FAQ page on Microchip help website: Attaching the TM5000 WVGA Display
Using the SAMA5D2 compatible Resistive Touchscreen The SAMA5D2 SoC has the support for Resistive Touchscreen. This feature is embedded in the ADC device. This cannot...
Use of the AT91 ADC driver Introduction This is the description of the Microchip AT91 ADC driver. It is used for SoC based on ARM9 cores and SAMA5D3 and SAMA5D...
eMMC support for SAMA5D27 SOM1 EK board Introduction This page represents a summary of tested eMMC devices with our SAMA5D27 SOM1 EK . The eMMC are of different...
Using PTC (Peripheral Touch Controller) The QTouch Peripheral Touch Controller (PTC) subsystem offers built in hardware for capacitive touch measurement on sensors...
UsingISC (Image Sensor Controller) Introduction This page describes how to configure and use of the ISC in SAMA5D2 SoC with the image sensors. The Image Sensor...
SAMA7G5 and Sony IMX274 examples Introduction Sony IMX274 is a 10/12 bit Raw BAYER sensor with a CSI2 MIPI 4 lane connection. To have the sensor working with sama7g...
DT Overlay Introduction A device tree overlay is a file that can be used at runtime (by the bootloader in our case) to dynamically modify the device tree, adding...
U Boot Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several processors...
How to use Microchip AT91 power management modes Introduction This page describes the way Microchip AT91 power management modes could be used in Linux. Available...
tag Kernel Pre built Demo Media type Board Features Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
How to build Buildroot for AT91 Prerequisites Host build system should be a Linux system with software installed. In addition to these required packages, you should...
Applications Graphics Toolkit Graphics Toolkit (EGT) Graphics Toolkit (EGT) : A Linux GUI Toolkit for Microchip Microprocessors WiFi and...
Linux4SAM Software tools AT91Bootstrap U Boot Linux Kernel DT Overlay Open source solutions Yocto Project Buildroot OpenWrt Applications...
RSS feed, ATOM feed, WebNotify, site changes, site map r1 - 15 Nov 2006 - 19:43:52 - TWikiContributor
Linux4SAM
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Microchip® and others, are registered trademarks or trademarks of Microchip Technology Inc. and its subsidiaries. 
Arm® and others are registered trademarks or trademarks of Arm Limited (or its affiliates). Other terms and product names may be trademarks of others.
Ideas, requests, contributions ? Connect to LinksToCommunities page.