Recent Changes in Linux4SAM Web retrieved at 05:38 (GMT)

OpenEmbedded / Yocto Project / Poky: build from sources How to build Poky for AT91 Note that building an entire distribution is a long process. It also requires...
Setup ARM Cross Compiler 10.2 2020.11 Ubuntu: In Ubuntu, you can install the ARM Cross Compiler by doing: sudo apt get install gcc arm linux gnueabi export...
Linux Kernel 5.15 Linux 5.15 for MPU source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
SAMA7G5 and Sony IMX274 examples Introduction Sony IMX274 is a 10/12 bit Raw BAYER sensor with a CSI2 MIPI 4 lane connection. To have the sensor working with sama7g...
Boot Logo for SAM SOC`s Introduction Using a splash screen or a boot logo is a good idea to display something on the LCD screen to the user till Linux boots completely...
UsingISC (Image Sensor Controller) Introduction This page describes how to configure and use of the ISC in SAMA5D2 SoC with the image sensors. The Image Sensor...
Software Tools SAM BA (SAM Boot Assistant In system Programmer) can run on: Windows 32 bit and 64 bit Linux x86 and x86 64 SAM BA is able to program...
Welcome to 1 Welcome to the main starting point for Linux OS on Microchip Microprocessors. Its aim is to centralize information about Linux kernel and open source...
Thermal management support on SAMA7G5 Introduction SAMA7G5 support thermal management. The in SoC temperature sensor is connected to channel 31 of ADC. Starting with...
Using I2SC (Inter IC Sound Controller) Introduction This page explains how to enable and configure I2SC from SAMA5D2 and SAM9X60 SoCs to an external codec, using...
Using ASRC (Asynchronous Sample Rate Converter) Introduction This page explains the usage of ASRC, available in SAMA7G5 SoCs. The Asynchronous Sample Rate Converter...
Welcome to 1 Welcome to the main starting point for Linux OS on Microchip Microprocessors. Its aim is to centralize information about Linux kernel and open source...
Using the SAMA5D2 compatible ADC device Introduction This page describes how to test the features of the SAMA5D2 compatible ADC device. This driver uses the Industrial...
How to use WILC3000 on SAM development boards Introduction This page describes how WILC3000 devices could be used on SAM development boards. Supported devices...
Using FIT image and Device Tree Overlays How it works Using FIT with overlays Since U boot 2018.07, released with linux4sam 6.0, we have the feature of adding Device...
FAQ classification base form of Linux4SAM This is the base form for classification for Linux4SAM. Form Definition Name Type Size Values Tooltip...
U Boot FAQ How does U Boot auto detect the connected PDA on my board ? A: U Boot uses a specific GPIO pin to read a memory from the connected PDA. More information...
Recent update of FAQ This is the recent update of FAQ based on classification defined by WebFaqBaseForm FAQ updates by Boards $ Sama7g5 ek: $ Sama5d2 icp...
SAMA5D2 Chip Features The SAMA5D2 series is a high performance, ultra low power ARM Cortex A5 processor based MPU. The Cortex A5 processor runs up to 500MHz and features...
Linux4SAM Software tools AT91Bootstrap U Boot Linux Kernel DT Overlay Open source solutions Yocto Project Buildroot OpenWrt Applications...
U Boot Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several processors...
Dedicated page on U Boot wiki: http://www.denx.de/wiki/U Boot/SourceCode You can easily download U Boot source code from GitHub U Boot repository: clone the Linux4sam...
eXtended Image Sensor Controller (XISC) and MIPI CSI 2 pipeline Introduction This page describes how to use and understand the MIPI CSI 2 pipeline in SAM MPU products...
USB gadget configuration Introduction This page is mainly about how to configure USB Gadget on Linux kernel. There are two ways to configure the USB Gadget framework...
How to use the Atmel KMS/DRM LCD driver Introduction Since linux 3.18 at91, the recent Atmel SoCs have a new LCD driver that is based on the Linux KMS/DRM sub system...
UsingMaxTouch Introduction The maXTouch Series features a complete portfolio of high performance single chip controllers designed to address every touchscreen size...
Using PTC (Peripheral Touch Controller) The QTouch Peripheral Touch Controller (PTC) subsystem offers built in hardware for capacitive touch measurement on sensors...
Using the SAMA5D2 compatible Resistive Touchscreen The SAMA5D2 SoC has the support for Resistive Touchscreen. This feature is embedded in the ADC device. This cannot...
Using ISI (Image Sensor Interface) in Linux4SAM 6.0 and later Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different...
WiFiProvisioningOverBLE This demo application provides demo to user on how to provision Wi Fi credentials of the Home AP via the Bluetooth low energy (BLE). This...
Linux4SAM Web Preferences The following settings are web preferences of the Linux4SAM web. These preferences overwrite the site level preferences in...
WebBasedWiFiProvisioning The SAMA5D27 WLSOM1 EK boards enables to configure the WiFi credentials over the HTML based webpage. The WILC module comes up as a Access...
Tips and Tricks Known Issues Using Inter IC Sound Controller (I2SC) Using Image Sensor Controller (ISC) Using Image Sensor Interface (ISI) Shutdown Wakeup Using...
Yocto Project Introduction The Project is a powerful building environment. It is build on top of several components including the famous OpenEmbedded build...
Using Ultra Low Power mode 1 (ULP1) on SAMA5D2 Introduction In products like the SAMA5D2 the Ultra Low Power mode 1 is available to gain even more power when the...
Use SAM BA Programming a demo can be done by using the .bat or .sh scripts provided or by using the SAM BA GUI. We`ll focus on the latest solution. The components...
How to manually select (or enforce) the PDA at boot time How it works How to select the PDA at boot time Starting from Linux4SAM6.0 release, we release a single...
Shutdown / Wake Up FAQ Use the Wake Up function on AT91SAM9x5 EK board There are two options to wake up the board: using the WAKE UP button located on...
Using ISI (Image Sensor Interface) Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different image sensors. The...
Connect the SAM BA with USB Install SAM BA software in your PC 172677.700868 usb 2 1.4.4: new full speed USB device number 31 using ehci pci 172677.792677 usb...
Yocto Project FAQ The obp utils do install task fails When building a distribution including the meta atmel layer, I have an error which state that the obp...
Dec 2008 53899 105 4 19583 WebHome 4849 U Boot 4684 GettingStarted 4588 LinuxKernel 3774 SoftwareTools 3479 AT91Bootstrap 2320 OpenEmbeddedAngstrom...
Store root filesystem on a SD card The default boot environment is built to run form the first partition of an ext4 formated SD card. It is seen as mmcblk1p1 from...
U Boot FIT image support Introduction U Boot FIT image is a uImage format which can combine the Kernel zImage and Kernel dtbs. For more information, check the document...
U Boot FIT image support Introduction U Boot FIT image is a uImage format which can combine the Kernel zImage and Kernel dtbs. For more information, check the document...
Video player demo Introduction For a pleasant out of the box experience using the AT91SAM9x5 family (SAM9G15, SAM9G25, SAM9G35, SAM9X25, SAM9X35) a QT based demo...
Statistics for Linux4SAM Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic save...
Statistics for Linux4SAM Web 2010 Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic...
Dec 2007 23167 1 0 3590 WebHome 2464 LinuxKernel 2349 GettingStarted 2221 U Boot 2056 SoftwareTools 2042 AT91Bootstrap 1468 OpenEmbeddedAngstromBuild...

«Previous   1  2  3  4  5   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

r1 - 15 Nov 2006 - 19:43:52 - TWikiContributor
 
Linux & Open Source for AT91 Microchip Microprocessors

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microchip® and others, are registered trademarks or trademarks of Microchip Technology Inc. and its subsidiaries. This site is powered by the TWiki collaboration platform

Arm® and others are registered trademarks or trademarks of Arm Limited (or its affiliates). Other terms and product names may be trademarks of others.

Ideas, requests, contributions ? Connect to LinksToCommunities page.

Syndicate this siteRSS ATOM