Recent Changes in Linux4SAM Web retrieved at 09:34 (GMT)

Linux Kernel 6.1 Linux 6.1 for MPU source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as a...
Using systemd Introduction This section provides a guide on configuring and using systemd, the advanced system, and the service manager on target. Systemd...
How to use WILC3000 on SAM development boards Introduction This page describes how WILC3000 devices could be used on SAM development boards. Supported devices...
Welcome to 1 Welcome to the main starting point for Linux OS on Microchip Microprocessors. Its aim is to centralize information about Linux kernel and open source...
Software Tools SAM BA (SAM Boot Assistant In system Programmer) can run on: Windows 32 bit and 64 bit Linux x86 and x86 64 SAM BA is able to program...
Dedicated page on U Boot wiki: http://www.denx.de/wiki/U Boot/SourceCode You can easily download U Boot source code from GitHub U Boot repository: clone the Linux4sam...
Demo archives linux4microchip 2023.10 Pre built Demo Demo archives linux4microchip 2023.04 Pre built Demo Demo archives linux4microchip...
tag Kernel Pre built Demo Media type Board Features Binary Description Yocto Project / Poky based demo SD Card image \ SAMA5D...
How to build Buildroot for AT91 Prerequisites Host build system should be a Linux system with software installed. In addition to these required packages, you should...
Buildroot Introduction Buildroot is a simple, efficient and easy to use tool to generate embedded Linux systems through cross compilation` It uses the Linux...
U Boot Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several processors...
OP TEE Introduction documentation is the primary site for OP TEE. This document describes the sama5d2 platform support for OP TEE that has been added in various...
OpenEmbedded / Yocto Project / Poky: build from sources How to build Poky for AT91 Note that building an entire distribution is a long process. It also requires...
Linux4SAM Software tools AT91Bootstrap U Boot Linux Kernel DT Overlay Open source solutions Yocto Project Buildroot OpenWrt Applications...
Linux Kernel Ecosystem Kernel Archives is the primary site for the Linux kernel source. All Linux kernel versions, including latest snapshot or `release candidate...
Convert SAM BA scripts This page can help you convert your SAM BA script from one revision of SAM BA to the other. We made some little changes to the SAM BA API and...
AT91Bootstrap Introduction AT91Bootstrap is the 2nd level bootloader for Atmel AT91 SoC providing a set of algorithms to manage the hardware initialization such...
DT Overlay Introduction A device tree overlay is a file that can be used at runtime (by the bootloader in our case) to dynamically modify the device tree, adding...
You can easily download DT Overlay source code from GitHub DT Overlays repository: clone the Linux4Microchip GitHub DT Overlay repository $ git clone https...
SAM9X75 Curiosity Kit SoC Features Recent FAQ
Common to most of the boards Serial terminal configuration common Exceptions: sama5d2 revision A , only to access the ROMCode through serial interface and...
Using the SAMA5D2 compatible ADC device Introduction This page describes how to test the features of the SAMA5D2 compatible ADC device. This driver uses the Industrial...
Crypto hardware acceleration Introduction This page is mainly about how to use crypto hardware acceleration in OpenSSL.Many internet applications such as OpenSSH...
USB gadget configuration Introduction This page is mainly about how to configure USB Gadget on Linux kernel. There are two ways to configure the USB Gadget framework...
How to use Pulse Width Modulation driver Introduction This page describes how PWM could be configured, debugged and used on SAMA5D2 devices. Since linux...
How to use the Atmel KMS/DRM LCD driver Introduction Since linux 3.18 at91, the recent Atmel SoCs have a new LCD driver that is based on the Linux KMS/DRM sub system...
UsingMaxTouch Introduction The maXTouch Series features a complete portfolio of high performance single chip controllers designed to address every touchscreen size...
How to patch Device Tree Blob in U boot using Overlays How it works How to patch Device Tree Blob in U boot using Overlays Starting from U boot 2018.07 released...
Using I2SC (Inter IC Sound Controller) Introduction This page explains how to enable and configure I2SC from SAMA5D2 and SAM9X60 SoCs to an external codec, using...
Media controller pipeline for image acquisition and SAM MPU products Introduction Starting from kernel version linux 5.15 at91 and mainline 6.2, MPU products Linux...
Image Sensor Controller White balance features These features are available and apply only for the Atmel Image sensor controller . They do not apply for the Image...
SAMA7G5 Image Acquisition pipeline Introduction This page is a complete reference to SAMA7G5 image acquisition pipeline capabilities, focusing on the software for...
Unable to build gst1 at91 gstreamer plug in in Buildroot Description When trying to build Buildroot with its associated buildroot external microchip git tree, it...
External Component on External Bus Interface Introduction The External Bus Interface is designed to ensure the successful data transfer between several external...
SD card boot for AT91SAM SoC Introduction This page describes how to create from scratch a bootable SD card for Microchip MPU SoCs. It also includes some FAQs...
Hash error when booting FIT image How does the issue manifest Starting from U boot 2021.04 released in Linux4SAM 2021.04, you could notice the following error when...
Using FIT image and Device Tree Overlays How it works Using FIT with overlays Since U boot 2018.07, released with linux4sam 6.0, we have the feature of adding Device...
U Boot FAQ How does U Boot auto detect the connected PDA on my board ? A: U Boot uses a specific GPIO pin to read a memory from the connected PDA. More information...
FAQ classification base form of Linux4SAM This is the base form for classification for Linux4SAM. Form Definition Name Type Size Values Tooltip...
Recent update of FAQ This is the recent update of FAQ based on classification defined by WebFaqBaseForm FAQ updates by Boards $ Sama5d29Curiosity: $ Sam9x60Curiosity...
Configure AT91Bootstrap sama5d3xek Assuming you are at the AT91Bootstrap root directory, you will find a board/sama5d3xek folder which contains several default...
SAM BA 3 subsections Install SAM BA software in your PC In addition to the official SAM BA pages on http://www.microchip.com, we maintain information about SAM BA...
Create a SD card with the demo You need a 1 GB SD card (or more) and to download the image of the demo. The image is compressed to reduce the amount of data to download...
SAMA5D2 Chip Features The SAMA5D2 series is a high performance, ultra low power ARM Cortex A5 processor based MPU. The Cortex A5 processor runs up to 500MHz and features...
Board Template Page Kit Information Kit Overview Access the console Demo Demo archives Build From source code Setup ARM Cross Compiler Build AT91Bootstrap...
Setup ARM Cross Compiler 11.2 2022.02 Ubuntu: In Ubuntu 22.04 LTS, you can install the ARM Cross Compiler by doing: sudo apt get install gcc arm linux...
SAMA5D29 Curiosity SoC Features Recent FAQ
Linux Kernel 5.15 Linux 5.15 for MPU source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
WebBasedWiFiProvisioning The SAMA5D27 WLSOM1 EK boards enables to configure the WiFi credentials over the HTML based webpage. The WILC module comes up as a Access...
Boot Logo for SAM SOC`s Introduction Using a splash screen or a boot logo is a good idea to display something on the LCD screen to the user till Linux boots completely...
tag Kernel Pre built Demo Media type Board Features Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
SAMA7G5 and Omnivision OV7740 This page describes the possibility of connecting a parallel sensor (example given is Omnivision ov7740) to the SAMA7G5 MPU. The board...
Welcome to 1 Welcome to the main starting point for Linux OS on Microchip Microprocessors. Its aim is to centralize information about Linux kernel and open source...
Using ASRC (Asynchronous Sample Rate Converter) Introduction This page explains the usage of ASRC, available in SAMA7G5 SoCs. The Asynchronous Sample Rate Converter...
Thermal management support on SAMA7G5 Introduction SAMA7G5 support thermal management. The in SoC temperature sensor is connected to channel 31 of ADC. Starting with...
Using ISI (Image Sensor Interface) in Linux4SAM 6.0 and later Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different...
Attaching the TM5000 WVGA Display Follow the link to the FAQ page on Microchip help website: Attaching the TM5000 WVGA Display
Using the SAMA5D2 compatible Resistive Touchscreen The SAMA5D2 SoC has the support for Resistive Touchscreen. This feature is embedded in the ADC device. This cannot...
Use of the AT91 ADC driver Introduction This is the description of the Microchip AT91 ADC driver. It is used for SoC based on ARM9 cores and SAMA5D3 and SAMA5D...
eMMC support for SAMA5D27 SOM1 EK board Introduction This page represents a summary of tested eMMC devices with our SAMA5D27 SOM1 EK . The eMMC are of different...
Using PTC (Peripheral Touch Controller) The QTouch Peripheral Touch Controller (PTC) subsystem offers built in hardware for capacitive touch measurement on sensors...
UsingISC (Image Sensor Controller) Introduction This page describes how to configure and use of the ISC in SAMA5D2 SoC with the image sensors. The Image Sensor...
SAMA7G5 and Sony IMX274 examples Introduction Sony IMX274 is a 10/12 bit Raw BAYER sensor with a CSI2 MIPI 4 lane connection. To have the sensor working with sama7g...
How to use Microchip AT91 power management modes Introduction This page describes the way Microchip AT91 power management modes could be used in Linux. Available...
tag Kernel Pre built Demo Media type Board Features Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
Applications Graphics Toolkit Graphics Toolkit (EGT) Graphics Toolkit (EGT) : A Linux GUI Toolkit for Microchip Microprocessors WiFi and...
Known Issues Linux4SAM 2022.04 Unable to build gst1 at91 gstreamer plug in in Buildroot Linux4SAM 2020.10 Unable to build OpenWrt with Ubuntu 20.04
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
ConnectModuleFromPDA Connection Summary There are multiple types of display modules used on the SAMA5D2, SAMA5D3, SAMA5D4 Xplained boards , SAMA5D27 SOM1 EK , SAMA5D...
SAM9X60 Curiosity Kit SoC Features Recent FAQ
SAMA7G5 EK Board SoC Features Recent FAQ
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
SAMA5D2 ICP Board SoC Features Recent FAQ
OpenWrt Introduction OpenWrt is an open source project for embedded operating system based on Linux, primarily used on embedded devices to route network traffic...
Linux Kernel 5.10 Linux 5.10 for MPU source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
Enable and Configure PMECC (Programmable Multibit ECC) in AT91SAM SoC Introduction This page is mainly about how to enable and configure the PMECC in AT91SAM...
Older boards Getting Started for AT91SAM9x5 EK AT91SAM9x5 EK page Getting Started for SAMA5D3 EK SAMA5D3 EK page Getting Started for SAMA5D4 EK...
Unable to build OpenWrt with Ubuntu 20.04/21.04 Description When trying to build OpenWrt with linux4sam 2020.10 tag, it fails to complete the build on an Ubuntu...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
AT91Bootstrap 3.x series Introduction This page is dedicated to AT91Bootstrap 3.x series. For newer versions of AT91Bootstrap, check this page AT91Bootstrap...
BluetoothHeartRateProfile This demo application provides experience to user for heart rate profile of Bluetooth Low Energy (BLE). Application sends the data over...
WiFiProvisioningOverBLE This demo application provides demo to user on how to provision Wi Fi credentials of the Home AP via the Bluetooth low energy (BLE). This...
BleTransparentService This demo application demonstrates to user on how to use transparent service of Bluetooth Low Energy (BLE). This is a custom/user defined profile...
LinksToCommunities This topic aggregates the contact informations from open source communities that are represented on this website. In order not to duplicate...
Linux4SAM Web Preferences The following settings are web preferences of the Linux4SAM web. These preferences overwrite the site level preferences in...
Compiling Linux Kernel fails looking at OpenSSL header files Description While compiling the Linux kernel, some error described below are met with the scripts/sign...
Tips and Tricks Known Issues Using Inter IC Sound Controller (I2SC) Using Image Sensor Controller (ISC) Using Image Sensor Interface (ISI) Shutdown Wakeup Using...
Yocto Project Introduction The Project is a powerful building environment. It is build on top of several components including the famous OpenEmbedded build...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
Linux Kernel 5.4 Linux 5.4 for AT91 source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
FAQ about audio Why is there no sound when playing an audio file? A: The sound controlling devices are muted by default. You need to unmute them explicitly....
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
Audio Clocks On SAM9X60 Introduction In current SAM9X60 design, there is no exclusive fractional PLL for audio applications. Nevertheless, we can still reconfigure...
Linux Kernel 4.19 Linux 4.19 for AT91 source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
Using Ultra Low Power mode 1 (ULP1) on SAMA5D2 Introduction In products like the SAMA5D2 the Ultra Low Power mode 1 is available to gain even more power when the...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo SD Card image \ SAMA5D...
BuildRoot : use the demo root filesystem Flash the rootfs image Note that the root file system is installed at offset 0x800000 in the nand flash. From a Linux...
Use SAM BA Programming a demo can be done by using the .bat or .sh scripts provided or by using the SAM BA GUI. We`ll focus on the latest solution. The components...
SAM9X60 Evaluation Kit SoC Features Recent FAQ
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
SAMA5D27 WLSOM1 Evaluation Kit SoC Features Recent FAQ
PDA detection at boot time Introduction Starting with U boot 2018.07, U boot can autodetect which PDA screen is connected (if any is connected). How it works PDA...
How to manually select (or enforce) the PDA at boot time How it works How to select the PDA at boot time Starting from Linux4SAM6.0 release, we release a single...
Now you should have the Linux demo up`n running on your board ! You can access the Linux console through the serial line as explained just above Use the root login...
SAMA5D27 SOM1 Evaluation Kit SoC Features eMMC support on SDMMC0 The board is equipped with 8bit connector on SDMMC0 slot, which allows eMMC memories to be...
Shutdown / Wake Up FAQ Use the Wake Up function on AT91SAM9x5 EK board There are two options to wake up the board: using the WAKE UP button located on...
How to use record audio stream with PDMIC Introduction The Pulse Density Modulation Interface Controller (PDMIC) is a mono PDM interface controller and decoder that...
Linux Kernel 4.14 Linux 4.14 for AT91 source code The Linux kernel for Microchip ARM Based MPUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
Using ISI (Image Sensor Interface) Introduction This page is mainly about how to enable and configure the ISI in AT91SAM SoCs for different image sensors. The...
Connect the SAM BA with USB Install SAM BA software in your PC 172677.700868 usb 2 1.4.4: new full speed USB device number 31 using ehci pci 172677.792677 usb...
Driver Model in U Boot Introduction Driver model in U Boot is to provide a consistent model for U Boot drivers and the platform data / device tree information used...
Linux Kernel 4.9 Linux 4.9 for AT91 source code The Linux kernel for Microchip ARM Based PMUs (aka AT91) is distributed as a GIT tree hosted on GitHub as...
SAMA5D2 PTC EK Board SoC Features Recent FAQ
SAMA5D2 Xplained Board SoC Features Recent FAQ
SAMA5D4 Xplained Board SoC Features Recent FAQ
SAMA5D3 Xplained Board SoC Features Recent FAQ
Legacy U Boot Page Introduction Das U Boot the Universal Boot Loader website is the main entry point for this bootloader / debugging tool available on several...
Legacy Linux Kernel Page Ecosystem Kernel Archives is the primary site for the Linux kernel source. All Linux kernel versions, including latest snapshot or...
Legacy AT91Bootstrap Introduction AT91Bootstrap is a first step bootloader providing a set of algorithms to manage hardware initialization (GPIO, Clock, SDRAM...
Console no longer receives characters Sometimes the console no longer receives characters. It can prevent from stopping the boot sequence. If it happens, please follow...
Legacy Getting Started Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded Linux distribution...
Legacy Getting Started Page for AT91SAM9N12 EK Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded...
Legacy Getting Started page for AT91SAM9x5 family Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded...
GUI Solutions Crank Software Storyboard Suite for Atmel Microcontrollers Create rich UIs for Atmel Microcontrollers quickly and with ease using Crank Software...
Yocto Project FAQ The obp utils do install task fails When building a distribution including the meta atmel layer, I have an error which state that the obp...
Dec 2008 53899 105 4 19583 WebHome 4849 U Boot 4684 GettingStarted 4588 LinuxKernel 3774 SoftwareTools 3479 AT91Bootstrap 2320 OpenEmbeddedAngstrom...
AT91SAM9x5 EK Board SoC Features Recent FAQ
Now we Configure and Build kernel for board: $ make ARCH arm sama5 defconfig HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
Linux Kernel legacy Linux 3.6.9 for AT91 source code The Linux kernel for Atmel ARM based SoC (aka AT91) is distributed as a GIT tree hosted on GitHub as a...
Linux Kernel 4.1 Linux 4.1 for AT91 source code The Linux kernel for Atmel SMART Processor Based PMUs (aka AT91) is distributed as a GIT tree hosted on...
Linux Kernel 3.18 Linux 3.18 for AT91 source code The Linux kernel for Atmel ARM based SoC (aka AT91) is distributed as a GIT tree hosted on GitHub as a fork...
Linux Kernel 3.10 Linux 3.10 for AT91 source code The Linux kernel for Atmel ARM based SoC (aka AT91) is distributed as a GIT tree hosted on GitHub as a fork...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
Login only available to Linux4SAM website creators. Login This is not a collaborative portal but feel free to post comments or enhancements through the LinksToCommunities...
AT91SAM9N12 EK Special Page (for SAM9N12, SAM9CN12, SAM9CN11) Introduction Welcome to the Linux4SAM page dedicated to the newly introduced AT91SAM9N12 EK board...
AT91SAM9x5 family special page (for SAM9G15, SAM9G25, SAM9X25, SAM9G35 and SAM9X35) Introduction Hi! Welcome to the Linux4SAM page dedicated to the newly...
Store root filesystem on a SD card The default boot environment is built to run form the first partition of an ext4 formated SD card. It is seen as mmcblk1p1 from...
Secure Protocol Layers Improved Performances (SPLIP) Introduction This page describes the SPLIP feature introduced with SAMA5D2 SoCs. It combines both the Atmel AES...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto / Poky based demo NAND Flash \ AT91SAM9x5 EK...
Linux Kernel 4.4 Linux 4.4 for AT91 source code The Linux kernel for Atmel SMART Processor Based PMUs (aka AT91) is distributed as a GIT tree hosted on...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto / Poky based demo SD Card image \ SAMA5D2 Xplained...
Real Time solutions on AT91SAM SoC Introduction This page aims at presenting the two most important real time Linux solutions, their setup and the expected performances...
Hi, Here is are some updates on the Linux related topics for March 2016. Table of contents: Linux kernel 4.5 The new release of the Linux kernel, 4.5, was published...
Hi, The Atmel Linux team is pleased to start this new monthly newsletter. We will present you the major events in the Open Source Community around the Atmel products...
Hi all, Yes, the Atmel Linux newsletter for July 2015 is ready! This time we`ve tried another diffusion technique by using our Linux4SAM.org website storing the...
Hi all, Like we did last month, we only keep the title in this email. So, don`t hesitate to click on the topic of your choice and follow the link through http://www...
Hi all, It has been a busy end of year 2015 and beginning of 2016: So let`s share with you some of the enhancements added to our Linux offer. Don`t hesitate to follow...
Hi, For this newsletter, I`m happy to welcome another contributor: Ludovic Desroches who wrote about a topic that he likes: Buildroot! By the way, don`t hesitate to...
Home page of the Atmel Linux Newsletter Table of content: 2016 March 2016 February 2016 January 2015 August 2015 July 2015 June
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel tag Kernel Pre built Demo Board Description Binary Sources location SAMA5D2 Xplained Linux4SAM Yocto / Poky based demo...
U Boot FIT image support Introduction U Boot FIT image is a uImage format which can combine the Kernel zImage and Kernel dtbs. For more information, check the document...
SAMA5D3XEK SoC Features Recent FAQ
SAMA5D4EK SoC Features Recent FAQ
Audio Recording on AT91SAM9G20EK Introduction This page is a starting point to add recording functions to the AT91SAM9G20EK board (using Wolfson 8731). It contains...
SAM9M10 Gstreamer Introduction This page is a starting point to understand video capabilities of the AT91SAM9M10, and the basics of GStreamer. It contains the...
AT91Bootstrap Debugging with Eclipse for Linux Introduction The Eclipse has become the de facto industry standard environment host for embedded development. The...
Flashing a demo for SAMA5D3 Xplained SAMA5D3 Xplained board https://www.linux4sam.org/pub/Linux4SAM/GettingStarted a5d3 xplained/sama5d3 xplained.png Access...
Home Automation Demo Tips Tricks Demo revision Make sure that you have the latest demo revision: be sure to run Demo version 4.2 onwards . Compared to demo shipped...
Flashing a demo for SAMA5D3x family (for SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36) Evaluation Kit Access the console on DBGU serial port You can...
U Boot FIT image support Introduction U Boot FIT image is a uImage format which can combine the Kernel zImage and Kernel dtbs. For more information, check the document...
tag SAMA5D4 Xplained board support HDMI driver for SiI902x component on SAMA5D4 EK and SAMA5D4 Xplained boards power management enhancements power...
tag Kernel Pre built Demo Board Description Binary Sources location SAMA5D4 Xplained Linux4SAM Yocto / Poky based demo compiled from...
Flashing a demo for SAMA5D4 Xplained Evaluation Kit Access the console on DBGU serial port The DBGU serial console can be accessed from two connectors...
Flashing a demo for SAMA5D4 EK (for SAMA5D4 family: SAMA5D41, SAMA5D42, SAMA5D43 and SAMA5D44) Evaluation Kit Access the console on DBGU serial...
AT91SAM9M10 Special Page Introduction Hi! Welcome to the Linux4SAM page dedicated to the newly introduced AT91SAM9M10 SOC. This page provides the latest information...
OpenEmbedded / Angstrom Introduction is a powerful building environment. http://www.angstrom distribution.org/ Angstrom uses this environment to bring up...
Legacy Linux4SAM material For SAM9x5 family Legacy SAM9x5 family special page Legacy GettingStarted for AT91SAM9x5 family For SAM9n12 family Legacy SAM9N12 family...
Flash an UBI/UBIFS root filesystem Introduction This section describes how to load a UBI root filesystem image into the NAND FLASH of the board with SAM BA and...
FAQ about Linux support on AT91SAM9N12 EK How to use BuildRoot with an old Linux distribution? A: We have experienced some troubles using BuildRoot on old Linux...
Build BuildRoot for AT91SAM9N12 EK Introduction Buildroot is used to build the cross tool chain, a small root filesystem image of different types (jffs2, tar...
Build QT Demo for AT91SAM9N12 EK Introduction OpenEmbedded is a powerful building environment. OpenEmbedded has good support for porting Nokia QT to various...
Statistics for Linux4SAM Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic save...
Video player demo Introduction For a pleasant out of the box experience using the AT91SAM9x5 family (SAM9G15, SAM9G25, SAM9G35, SAM9X25, SAM9X35) a QT based demo...
Flash an UBI/UBIFS root filesystem Introduction This section describes how to load a UBI root filesystem image into the NAND FLASH of the board with SAM BA and...
FAQ about AT91SAM9x5 SoC family How to use BuildRoot with an old Linux distribution? A: We have experienced some troubles using BuildRoot on old Linux distribution...
build BuildRoot for AT91SAM9x5 family Introduction Buildroot is used to build the cross tool chain, a small root filesystem image of different types (jffs2,...
Get Buildroot Root filesystem pre built images The root filesystem images are jffs2 or ubi filesystem images containing an entire embedded Linux system....
Flashing a demo for AT91SAM9N12 family (for SAM9N12, SAM9CN11 and SAM9CN12) Before flashing the demo, make sure that you have installed the SAM BA tool on...
Flashing a demo for AT91SAM9x5 family (for SAM9G15, SAM9G25, SAM9X25, SAM9G35 and SAM9X35) Before flashing the demo, make sure that you have installed the...
Buildroot FAQ What are the prerequisites to use jffs2 root filesystem? A: You should enable the following kernel config Memory Technology Device (MTD) support...
SAM9x5 v4l2 video output for Mplayer Introduction The SAM9x5 parts with a LCD controller have an overlay layer which supports some hardware acceleration for video...
Statistics for Linux4SAM Web 2010 Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic...
Dec 2007 23167 1 0 3590 WebHome 2464 LinuxKernel 2349 GettingStarted 2221 U Boot 2056 SoftwareTools 2042 AT91Bootstrap 1468 OpenEmbeddedAngstromBuild...
Like in the Getting Started document, it is admitted that your OpenEmbedded building environment is located in /stuff/ directory (it may correspond to a working...
Top Menu of Linux4SAM Web This topic defines the menu structure of the Linux4SAM web, used by the TopMenuSkin. 1 Web` Create New Topic...
OpenEmbedded / Angstrom Demo Requirements SAM board power supply Serial, USB Ethernet cables USB hub USB keyboard mouse USB key...
OpenEmbedded / Angstrom : build from sources How to build Angstrom for AT91 Note that building an entire distribution is a long process. It also requires a big...
OpenEmbedded / Angstrom : get demo binaries Root file system pre built images The Root file system images are images of jffs2 filesystems containing a entire...
OpenEmbedded / Angstrom : use the demo root filesystem Boot to the installed rootfs Check Load Linux with u boot chapter in the u boot page to know how to load...
Like in the Getting Started document, it is admitted that your OpenEmbedded building environment is located in /stuff/ directory (it may correspond to a working...
Sep 2009 49306 9 0 21174 WebHome 3980 LinuxKernel 3692 U Boot 3677 GettingStarted 2856 AT91Bootstrap 2826 SoftwareTools 1540 OpenEmbeddedAngstrom...
Like in the Getting Started document, it is admitted that your OpenEmbedded building environment is located in /stuff/ directory (it may correspond to a working...
Partners
OpenEmbedded / Angstrom papers and presentations Papers and presentations 2004 to the GPE Palmtop Environment and the OpenEmbedded Project 2005 Embedded...
This is a subscription service to be automatically notified by e mail when topics change in this 1 web. This is a convenient service, so you do not have to come...
AT91SAM9260 EK SAM BA Recovery Reference documentation SAM BA Recovery application note. You also have a brief AT91SAM9260 EK Bootstrap Recovery Procedure...
TWiki`s Linux4SAM web The 1 web of TWiki. TWiki is a Web Based Collaboration Platform for the Enterprise.
/Linux4SAM The 1 web of TWiki. TWiki is a Web Based Collaboration Platform for the Enterprise.

 

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

r1 - 15 Nov 2006 - 19:43:52 - TWikiContributor
 
Linux & Open Source for AT91 Microchip Microprocessors

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microchip® and others, are registered trademarks or trademarks of Microchip Technology Inc. and its subsidiaries. This site is powered by the TWiki collaboration platform

Arm® and others are registered trademarks or trademarks of Arm Limited (or its affiliates). Other terms and product names may be trademarks of others.

Ideas, requests, contributions ? Connect to LinksToCommunities page.

Syndicate this siteRSS ATOM