Recent Changes in Linux4SAM Web retrieved at 14:44 (GMT)
Legacy Getting Started Page for AT91SAM9N12 EK Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded...
Legacy Getting Started Introduction This page is a starting point for the Linux4SAM offer and allows you to easily get a running embedded Linux distribution...
Legacy AT91Bootstrap Introduction AT91Bootstrap is a first step bootloader providing a set of algorithms to manage hardware initialization (GPIO, Clock, SDRAM...
Home Automation Demo Tips Tricks Demo revision Make sure that you have the latest demo revision: be sure to run Demo version 4.2 onwards . Compared to demo shipped...
GUI Solutions Crank Software Storyboard Suite for Atmel Microcontrollers Create rich UIs for Atmel Microcontrollers quickly and with ease using Crank Software...
Flashing a demo for SAMA5D4 EK (for SAMA5D4 family: SAMA5D41, SAMA5D42, SAMA5D43 and SAMA5D44) Evaluation Kit Access the console on DBGU serial...
Flashing a demo for SAMA5D4 Xplained Evaluation Kit Access the console on DBGU serial port The DBGU serial console can be accessed from two connectors...
Flashing a demo for SAMA5D3x family (for SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36) Evaluation Kit Access the console on DBGU serial port You can...
Flashing a demo for SAMA5D3 Xplained SAMA5D3 Xplained board https://www.linux4sam.org/pub/Linux4SAM/GettingStarted a5d3 xplained/sama5d3 xplained.png Access...
Flashing a demo for AT91SAM9x5 family (for SAM9G15, SAM9G25, SAM9X25, SAM9G35 and SAM9X35) Before flashing the demo, make sure that you have installed the...
Flashing a demo for AT91SAM9N12 family (for SAM9N12, SAM9CN11 and SAM9CN12) Before flashing the demo, make sure that you have installed the SAM BA tool on...
Older boards Getting Started for AT91SAM9x5 EK AT91SAM9x5 EK page Getting Started for SAMA5D3 EK SAMA5D3 EK page Getting Started for SAMA5D4 EK...
Flash an UBI/UBIFS root filesystem Introduction This section describes how to load a UBI root filesystem image into the NAND FLASH of the board with SAM BA and...
Flash an UBI/UBIFS root filesystem Introduction This section describes how to load a UBI root filesystem image into the NAND FLASH of the board with SAM BA and...
FAQ about AT91SAM9x5 SoC family How to use BuildRoot with an old Linux distribution? A: We have experienced some troubles using BuildRoot on old Linux distribution...
FAQ about Linux support on AT91SAM9N12 EK How to use BuildRoot with an old Linux distribution? A: We have experienced some troubles using BuildRoot on old Linux...
Driver Model in U Boot Introduction Driver model in U Boot is to provide a consistent model for U Boot drivers and the platform data / device tree information used...
tag SAMA5D4 Xplained board support HDMI driver for SiI902x component on SAMA5D4 EK and SAMA5D4 Xplained boards power management enhancements power...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo SD Card image \ SAMA5D...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ AT91SAM9x...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto / Poky based demo NAND Flash \ AT91SAM9x5 EK...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto / Poky based demo SD Card image \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel Pre built Demo Media type Board Screen Binary Description Boot on SPI Flash rootfs on SD Card \ SAMA5D2 Xplained...
tag Kernel tag Kernel Pre built Demo Board Description Binary Sources location SAMA5D2 Xplained Linux4SAM Yocto / Poky based demo...
tag Kernel Pre built Demo Board Description Binary Sources location SAMA5D4 Xplained Linux4SAM Yocto / Poky based demo compiled from...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
tag Kernel Pre built Demo Media type Board Screen Binary Description Yocto Project / Poky based demo NAND Flash \ SAM9X...
Secure Protocol Layers Improved Performances (SPLIP) Introduction This page describes the SPLIP feature introduced with SAMA5D2 SoCs. It combines both the Atmel AES...
Convert SAM BA scripts This page can help you convert your SAM BA script from one revision of SAM BA to the other. We made some little changes to the SAM BA API and...
Console no longer receives characters Sometimes the console no longer receives characters. It can prevent from stopping the boot sequence. If it happens, please follow...
Build BuildRoot for AT91SAM9N12 EK Introduction Buildroot is used to build the cross tool chain, a small root filesystem image of different types (jffs2, tar...
build BuildRoot for AT91SAM9x5 family Introduction Buildroot is used to build the cross tool chain, a small root filesystem image of different types (jffs2,...
BuildRoot : use the demo root filesystem Flash the rootfs image Note that the root file system is installed at offset 0x800000 in the nand flash. From a Linux...
Get Buildroot Root filesystem pre built images The root filesystem images are jffs2 or ubi filesystem images containing an entire embedded Linux system....
Buildroot FAQ What are the prerequisites to use jffs2 root filesystem? A: You should enable the following kernel config Memory Technology Device (MTD) support...
Buildroot Introduction Buildroot is a simple, efficient and easy to use tool to generate embedded Linux systems through cross compilation` It uses the Linux...
Compiling Linux Kernel fails looking at OpenSSL header files Description While compiling the Linux kernel, some error described below are met with the scripts/sign...
Unable to build OpenWrt with Ubuntu 20.04/21.04 Description When trying to build OpenWrt with linux4sam 2020.10 tag, it fails to complete the build on an Ubuntu...
Build QT Demo for AT91SAM9N12 EK Introduction OpenEmbedded is a powerful building environment. OpenEmbedded has good support for porting Nokia QT to various...
build ...
RSS feed, ATOM feed, WebNotify, site changes, site map r1 - 15 Nov 2006 - 19:43:52 - TWikiContributor
Linux4SAM
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Microchip® and others, are registered trademarks or trademarks of Microchip Technology Inc. and its subsidiaries. 
Arm® and others are registered trademarks or trademarks of Arm Limited (or its affiliates). Other terms and product names may be trademarks of others.
Ideas, requests, contributions ? Connect to LinksToCommunities page.