OpenEmbedded / Angstrom : use the demo root filesystem

Boot to the installed rootfs

Check Load Linux with u-boot chapter in the u-boot page to know how to load a Linux kernel.

Once loaded, the Linux kernel tries to mount a root file system ; command line parameters can indicate a location of such a rootfs. This option can be specified during the build process of through a u-boot environment variable.

Here is a sample command line for booting in the proper partition of the NAND FLASH : address indicated in the Address text field during the flashing process (step #6).

mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2
which leads to the following u-boot command to setup the environment :
setenv bootargs 'mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2'
saveenv

Once the Linux kernel and root filesystem loaded, you can access the Linux console through the serial line plugged on DBGU port.
Use the root login account without password.

Fit application set to your needs

While building the rootfs image

The AT91 demo policy is to bring the user more application to figure out what the capacities of the CPU are. We add then more packages at build time. The way to add packages to a base Angstrom image at building time is to add a new recipe, stating that it requires the base recipe, and to modify the ANGSTROM_EXTRA_INSTAL variable. Basically this is exactly the same thing as extending the RDEPENDS variable (Cf. x11-at91sam9-image.bb recipe):

RDEPENDS = "\
    [..] 
    ${ANGSTROM_EXTRA_INSTALL}"

Check the attached x11-at91sam9-image.bb file.

ANGSTROM_EXTRA_INSTALL += " \
    <package_name> \
    <another_package_or_task> \
    <..> \
    "

The complete process of how to build the rootfs is described in the How to build Angstrom for AT91 from sources chapter.

This point is discussed in details in this acticle : The correct way to add packages to an OpenEmbedded Image.

With pre-built packets in hands

Referring to the Angstrom Manual, you can check how to install new packages in an existing Angstrom distribution. 5. Installing Software and Package Management. So, there is always the ability to add applications to an already built distribution.

Here is different mean to add packaged applications to a running system.

Install application packages over the network

Reference chapter in the Angstrom manual.

Here is the Opkg official website.

On the target, /etc/opkg, /etc/opkg/*.conf files points towards the servers where the device can pull packages from.

Angstrom feeds are discussed in the Angstrom Wiki.

Information on available packages are stored on particular files: the Packages or Packages.gz . This kind of file is downloaded to the target while issuing the opkg update command.
You can create a custom opkg feed using a web server that is configured to point to the directory where resides compiled packages (*.ipk). Those packages are created during the OpenEmbedded building process. For example generic /armv5te/ compiled packages are located in tmp/deploy/glibc/ipk/armv5te .

Tip, idea If you build additional packages, do not forget to run bitbake package-index to update Packages and Packages.gz files in your opkg feed.

Procedure

On the host machine :

  • construct packages
  • run bitbake package-index
  • collect packages in a directory (done by the OpenEmbedded system : in path_to_deploy_dir/glibc/ipk/armv5te/)
  • configure your web server to give access to that directory

On the target

  • configure your Ethernet interface
  • check that you can access the web server and the feed (package directory)
  • run opkg update
  • run opkg list to see if the package you want is in the "available packages" list
  • run opkg install
  • check if the package is installed with the opkg list_installed command

Install application packages from local storage

Reference chapter in the Angstrom manual.

You can pick those packages in the deploy/glibc/ipk/ directory once you built them with bitbake.

You can install .ipk packages from all mass-storage support you can connect to a board.

  • usb key
  • SD/MMC card


r13 - 18 Mar 2010 - 11:29:49 - NicolasFerre
 
Linux & Open Source for AT91 Microchip Microprocessors

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microchip® and others, are registered trademarks or trademarks of Microchip Technology Inc. and its subsidiaries. This site is powered by the TWiki collaboration platform

Arm® and others are registered trademarks or trademarks of Arm Limited (or its affiliates). Other terms and product names may be trademarks of others.

Ideas, requests, contributions ? Connect to LinksToCommunities page.

Syndicate this siteRSS ATOM